Small hole
Coating layer for stripping 250um~125um fiber core
Middle hole
strip 900um-250um fiber core white soft rubber protective layer
Large hole
strip 2~3mm Optical fiber outer protective layer
Weight 125g
Length 165mm
Uses
For peeling 1 25um~3mm, Bare fiber, patch cord, sheathed fiber
Description
CSF-3 Optical fiber stripping plier Miller stripper
1.The V port on the clamp edge is used for stripping the 250um, 500um coating and the 900um buffer layer accurately.
2.Holes will be 250 microns to 125 microns with coating stripping fiber.
3.Second holes will be 900 microns to 250 microns sleeve layer.
4.large aperture for stripping 2-3 mm cable sheath handle design.
5. 1.0mm diameter stripping hole at the tip of tool that can be used to strip the fiber jacket.
6.All cutting sections have precise mechanical tolerances to ensure clean and smooth operation.
7.Lock to hold tool closed when it is not in use.
8.Pre-set at the factory-no adjustments needed.
